Agp intel extreme graphics 2 software#
To rule out the possibility of AIDA64 detecting the wrong clock frequencies, try to check the same information using other software like CPU-Z, HWiNFO and SIV as well. (2869 Mod) Rebranded : Intel (R) HD Graphics Family Q : Whats New in this version A : Introduction.
Agp intel extreme graphics 2 full#
We picked the Radeon 9000 Pro because it sells for. Intel GMA 4500 M / MHD Extreme Plus 2 (by nIGHTmAYOR) Full Name : Intel (R) Graphics Media Accelerator Family Version : 20. If the right FSB strap is used by the motherboard, at 266 MHz FSB the PCI clock should be FSB/8, and the AGP clock should still be double the PCI clock. We’ve decided to test the 865G’s Extreme Graphics 2 against one of the cheaper low-end AGP cards we have around, an ATI Radeon 9000 Pro 64MB. In other words, at 200 MHz FSB the PCI clock should FSB/6 (FSB clock divided by 6), and the AGP clock should be double the PCI clock. If it has a different strap for 266 MHz FSB than for 200 MHz FSB, then no overclocking of the PCI and AGP clocks should be used when you switch from 200 MHz FSB to 266 MHz FSB.
When they can be detected, the PCI and AGP clocks are shown on the Motherboard / Motherboard page.Īs for how the PCI and AGP clocks are driven, it depends on the FSB logic (FSB strap) the motherboard uses. Leveraging the intel 865g chipset to support 3ghz+ p4 cpus on 800mhz fsb, intel hyper-threading technology and revolutionary intel extreme graphics engine 2, the ga-8i865gmk-775 rev 1.0 delivers a full-value, outstanding performance solution for todays most demanding tasks.
I also found the following statement on I-Net - quote:īecause I set it to 66 MHz in the BIOS. I would have expected a clock of 66 MHz instead of 89 MHz if the mainboard had actually blocked the AGP / PCI bus. My AIDA 64 outputs: Motherboard/Motherboard My Question: AIDA Extreme shows me something wrong here, or contrary to what the mainboard manufacturer says, the AGP PCI clock is not fixed at all?
which can include an Accelerated Graphics Port (AGP) specifically designed for video cards. Untied Overclocking: During Overclocking, FSB enjoys better margin due to fixed AGP / PCI Buses (How can I verify that?) It isnt compatible with Intels latest 12th-gen processors. Now I wonder if the FSB increase from originally 200 to 266 Mbit / sec., or higher by overclocking, also affects my sound card in the PCI slot and also the graphics card in the AGP slot?ĪSRock writes: **FSB1066-CPU is supported by overclocking only when you adopt an external VGA card and DDR400 CL2.5 memory modules. The mainboard is an ASRock 775i65G, equipped with an Intel Q6700 quad core, FSB 266 / Multi 10, two Skill RAM's with 2,5/3/3/6 I am currently building an old system that will allow me to continue using my AGP graphics card and DDR1 SDRAM. Hello, I am 57 years old, I only have primary school English and therefore I have to use Google Translate (German-English) all the time :-(